cat tree

Oh hey, it's been a while. I made this a while ago, but surprise surprise, I'm just now getting around to posting it. :) I've been wanting to make a cat tree for a while but I had been very wishy washy about actually getting off my butt and doing it. However, after I saw a picture of one made with tree branches that looked super cool, I finally got the fire under my butt to go and make one(and to force the fiance to help!)

Gremlin is spoiled.

This one is the tree that inspired me. I loved that it was made to look like an actual tree. However, it cost like $700. So of course immediately i thought, "Psh, I can make that." And you get to see just how I did.

I was lucky enough to get inspired right after they cleared the empty lot next to my house, so there were plenty of decent sized tree branches for me to sort through. Here are the winners.

Then I had to trim the branches to size. I love my pull saw!

Here are all the pieces ready to be put together. Unfortunately I didn't get any pictures of me making the carpeted components. Basically I made a base and a platform out of plywood and covered it with carpet. (Remnant carpet, ftw!) For the half cylinder platform I took a concrete tube mold, cut it to size and then in half. I hot glued the halves together to help make it stronger and then glued the carpet on.

Here's where my fiance had to step in to help. After eyeballing where I wanted the main branch to be, I carefully tipped the branch and base over so he could drill through the base and into the branch from the bottom. We ended up screwing in a pretty decently sized screw to hold it in place and then reinforced it with smaller (but still pretty substantial) screws. My cat is a big boy.

And just a few screws later!

But really, we didn't get any pictures of us assembling the rest of it sadly. This part was all pretty much just trial and error. We'd place something and see how the other components would fit in and we adjusted the pieces until it was to our liking. Basically we just attached the shorter stumpy branch onto the base just like the first one and then screwed the platform onto it and into the tall branch. The carpet hides the copious amounts of screws we used to keep that thing in place.

I positioned the thin branch on the platform so that it helped support the top platform and we screwed all those in too. I then took the drill and drilled a few random holes into the branches and stuck some fake leaf branches in them. Initially I was going to hot glue them in place, but the drill bit I used made a hole that they fit so snugly into that I didn't feel the need for the glue. If Gremlin ends up pulling any of them out then I can just glue them back in later.

I wrapped the short stubby branch with sisal for a nice scratching area. Which he has yet to touch even still.

So since my cat is a big burly man-cat, I decided to make his tree pretty with flowers. I hot glued those suckers on and prayed he wouldn't see them as toys and rip them off. (Which is totally what happened. Oh cats.)

And here it is finished! Complete with the I'm-too-excited-about-how-this-turned-out-and-I'm-going-to-take-a-picture-before-I-even-clean-up mess everywhere.